Accessories + Cases
Selbstverständlich bieten wir Ihnen auch maßgeschneidertes Zubehör wie Flightcases, Wand- und Deckenhalterungen für Projektoren und Displays, 3D-Signalprozessoren und Modulatoren sowie Spezialkabel.
VRLOGIC Modular Case Solution for 5 to 30 pairs of CE4s Shutterglasses
Representative, lightweight Aluminium case system (Master) for a save transport and storage for 5 pairs of RealD Pro CE4s Shutterglasses and a separate area for accessories like a cables, emitter or a USB charger. Robust and elegant design with lockable comfort quicklocks and Aluminium profiles. (Picture shows Master and sub-case)
If the accessories area in the Master Case is not needed, there is another inlay available (optional) which can take a total of 10 pairs of CE4s shutterglasses.
The Master Case can be extended with an additional sub-case (optional) which is attached to the Master with 4 case locks on the side. This sub-case can take another 20 pairs of RealD Pro CE4s Shutterglasses. So a total of up to 30 pairs can be stored.
| Extras | Variations |
Dimensions ca.:
|
Master Case 530x125x510 mm (BxHxT)
Sub-Case Case 530x130x510 mm (BxHxT) |
Weight:
|
ca. 3 kg (Master Case)
ca. 3 kg ( Sub-Case) - Optional |
Features:
|
Master Case: Top-Cover comfort handle, 2 Case locks with key, rubber-feet,
Sub-Case: Duallock hook&loop fastener to attach to Master Case, rubber-feet,
|
Interior:
|
Master Case: Special shaped foam inlay for RealD Pro 5 pairs of CE4s Shutterglasses,
and an extra accessories panel
Optional:
Inlay for Master case: Special shaped foam inlay for RealD Pro 10 pairs
of CE4s Shutterglasses without accessoires panel
Sub-Case with 2 Special shaped foam inlays stacked in case each for 10 pairs of RealD
Pro CE4s Shutterglasses.
The Sub-Case can only be used in combination with the Mater Case.
|
Profi-Case for 5 pairs of Shutterglasses, including USB charger
Representative case for a save transport and storage of up to 5 pairs RealD Pro/ StereoGraphics CE4s or XPAND Shutterglasses. Including USB charger for simultaneous charging of all CE4s Shutterglasses stored in the case.
Robust and noble design with lockable comfort quicklocks and Aluminium profiles.
| Extras | Variations |
Dimensions ca.:
|
530x125x510 mm (BxHxT)
|
Weight:
|
ca.: 6 kg
|
Features:
|
Top-Cover arrangable, comfort
handle, 2 Case locks with key,
rubber-feet, incl. USB Charger
system for CE4s glasses,
Duallock hook&loop fastener |
Interior:
|
Universal shaped foam inlay for 5
pairs CE4s Shutterglasses (or XPAND),
and an extra accessories panel for the
USB charger |
Profi-Case for 10 pairs of Shutterglasses, including USB charger
Representative case for a save transport and storage of up to 10 pairs RealD Pro/StereoGraphics or XPAND Shutterglasses. Including USB charger for simultaneous charging of all CE4s Shutterglasses stored in the case.
Robust and noble design with lockable comfort quicklocks and Aluminium profiles.
| Extras | Variations |
Dimensions ca.:
|
530x125x510 mm (BxHxT)
|
Weight:
|
ca.: 8 kg
|
Features:
|
Top-Cover arrangable, comfort
handle, 2 Case locks with key,
rubber-feet, incl. USB Charger
system for CE4s glasses,
Duallock hook&loop fastener |
Interior:
|
Universal shaped foam inlay for 10
pairs of CE4s Shutterglasses (or XPAND),
and an extra accessories panel for
the USB charger |
Transport-Case for 22“ to 24“ displays and accessories
Representative case for a save transport and storage of a 22" or 24" stereo 3d display. Robust and noble design with lockable comfort quicklocks
Transport-Case for 46“ Hyundai S465D 2D/3D Display, detachable wheels
Professional case for a safe transport of the Hyundai S465D 46“ 2D/3D displays and accessories. The display is packed headfirst. Speakers and stand do not have to be detached. Even a wall-mount (depending on model) can be mounted during transport. This is enabling a quick setup and repacking at the site. Below the display is a separate covered accessories box for cables, remote control, polarisation glasses, etc.
| Extras | Variations |
Dimensions ca.:
|
1220x1160x365 mm (BxHxT)
|
Weight:
|
ca.: 65 kg (Opt.: DuraFlight 50kg)
|
Features:
|
Top-Cover detachable, 8 integrated
handles at both sides,
4 Butterfly-Locks (2 with eyes),
big ball edges, 4 Blue-Wheels
(2 with brakes) detachable
|
Interior:
|
shaped foam for display, knob
foam in top-cover, separate
accessories box under display
|
Transport-Case for F10 AS3D and Accessories
Comfortable projectiondesign F10 AS3D case for a safe transport and storage of one High-End 3D stereo projector and a wide range of accessories. Optimized interior for a complete system: projector, DVI-cables, power cable, remote control, 5 pairs RealD/StereoGraphics shutter glasses, USB charger and further accessories. Representative and robust Design.
| Extras | Variations |
Dimensions ca.:
|
ca. 400x300x300 mm (BxHxT) |
Weight:
|
ca.: 6 kg
|
Features:
|
Top-Cover arrangable, comfort
handle, 2 Case locks with key,
rubber-feet
|
Interior:
|
shaped foam for projector, knob
foam in top-cover, removable
accessories box and 2 integrated
accessories boxes for
cables, IR RC, eyewear, etc.
|
Color Palette and Marking/Logos
All above Cases can be manufactured with a customized exterior housing color out of 15 different colors without additional costs. Please contact us for the full color palette sheet. Optional the Cases can be marked with logos or lettering. All Cases are Made in Germany with the Norm IPPCISPM15 for a worldwide usage. No international Transport problems with because of IPPC-SPM15 Norm.
Spare bulbs for projectors
Spare bulbs for different kind of projectors such as: christie digital systems, Lightspeed/Infocus, projectiondesign
see more
