3-D Enabling Products

Digital IMAGE Infrared Long Range Emitter

digital IMAGE, Model 619HP , High Power IR Emitter. Multi Protocol IR Emitter with BNC Connector and high Output Used to drive IR Shutter glasses of different manufacturers. The 619 IR Emitter consists of a Signal Reception, Generator, Processor and a IR Panel with high power infrared diodes. The infrared diodes are triggered in the appropriate way to drive several types of glasses. A computer or projector generates a rectangular signal of 120Hz to drive the assembly. This signal is fed into a microprocessor. Corresponding to the selected protocol at diall the infrared diodes are triggered and drive the glasses. The emitter transmits infrared radiation in an angle of +-60 degrees horizontal and vertical. The housing is transparent to IR radiation and diffuses the beams a little.

Extras	Variations
Model	619 IR Emitter Mark II, Multi Protocol
Power Supply	24V, 0.4 A
Power usage	2W
AC Power	110/220V
Fuse	inside Power Supply
Size	14,5 x 5,5 x 2,5 cm without Plug ca. 18,5 x 5,5 x 2,5 cm with Plug
Range	approx. 6-10 m (depending on glasses, surfaces and position)
Weight	250 g
Speed	100-140 Hz
Manufacturer	digital image
Stereo 3-D Formats	multiprotocol: CE3/CE4, x101, Volfoni, nVidia IR 3D Vision, NuVision 60GX, Samsung SSG1000, Eyes3Shut

doremi - Dimension-3D Format Converter

The Dimension-3D format converter that converts any 3D format to another including changing of the frame rates.

LMP - Multiplexer (HD-X 3D)

The HD Multi-X 3D is a universal 3D video processor used for stereoscopic 3D production an broadcast applications. It enables live 3D monitoring as well as recording of any 3D signal via a single DVI-and/or HDSDI signal in various configurations. In reverse mode, recorded stereoscopic formats are processed for monitoring to DVI and dual HDSDI streams. The most common 3D formats are supported, even anaglyph and sequential frame at 3Gbit/s. For mirror riggs, horizontal- and vertical flip are provided.

Extras	Variations
input format	2 x HDSDI SMPTE 292M or 1 x HDSDI SMPTE 424M
dimensions	140 x 120 x 30 mm
weight	420g
power	nom. 12V DC 12 Watt
power connector	Binder 710 3 pol
Input Camera mode	2 x HDSDI 1,485 Gbit/s SMPTE 292 or 1 x 2,97 Gbit/s SMPTE 424
HDSDI multiplex signal	sidebyeside, above/below, interlaced
HDSDI dual stream or single stream 3D	sequential frame
DVI switchable:	Input A, Input B, vertical split A/B, horizontal split A/B, Mix 50% A+B, Differenz A-B, linebyline A/B, sidebyside A/B, above/below A/B, Anaglyph red/cyan, linebyline, above/below, sidebyside, sequential (3 Gbit/s)
Output recorder mode	2 x HDSDI Out A or Out B DVI as camera mode HDSDI as camera mode

nVidia IR & Pro RC Emitter cable for VESA Port

With this cable it is possible to connect the nVidia Emitter to the VESA Port (3-Pin Mini-DIN) and use it with the Generic USB driver and Professional Projectors which provide the Sync Signal. The Emitter then supports Professional graphic cards as well as the GeForce(R) series cards.

RealD Pro StereoGraphics E2 Emitter

Standard Work Area Emitter for Desktop Computers with VESA Port (3-Pin Mini-DIN)

Extras	Variations
Range	12ft (3.6m)
Infrared 'spread'	Wide Mode: 120 degreesNarrow Mode: 60 degrees
Power supply	PC/Mac Pro: From Graphics CardMac: From Power Supply

RealD Pro StereoGraphics ELR-2 Long Range Emitter

Extended Area Emitter for Desktop Computers with VESA Port (3-Pin Mini-DIN) and small area coverage (6m).

Extras	Variations
Range	20ft (6m)
Stereo Connector	3-Pin Mini-DIN - 8ft (2.5m) cable
Infrared 'spread'	120 degrees
Power supply	Universal Power Supply

RealD Pro StereoGraphics EXXR Extra Long Range Emitter

Infrared-Emitter, including VESA-BNC-cable (1.8 m), power supply, 24 Months Warranty. Spezifications: Range: ca. 21 m, 110° horizontal, 40° vertical. P/N EXXR

Extras	Variations
Range	70ft (21m)
Stereo Connector	3-terminal connector block (For simple on-site connection) and BNC
Infrared 'spread'	130 degrees
Power supply	Universal Power Supply (output 24VDC) supplied

Cables and Extensions for Emitters

We are offering a large range of nearly any special cables and exensions for Emitters.

P/N:	Description:
0920017-072	3 pin mini-DIN (m) (VESA) to BNC cable
0920054-x	3 m / 7,5 m / 15 m VESA 3-pin Mini-DIN extension cable
82251	DB9 (m) (EPRO) to BNC adapter
69979	3-pin mini-DIN (m) (VESA) to DB9 (f) cable (for ESGI)
0920016-001	VESA 'Y' Adapter (3 pin mini-DIN (m) to two 3 pin mini-DIN (f))

RealD Pro StereoGraphics - StereoEnabler

Get True Stereo3D™ on Windows 2000/XP with the StereoEnabler™!

- Discontinued | We are sorry but this product is not availbale anymore. -

RealD Side-by-Side POD

The RealD SbS POD receives and transmits a single HDMI compatible audio/video signal. When receiving standard 2D content, the content is passed from input to output without modification; but when receiving the RealD 3D format content, the format is automatically converted into either Checkerboard (CB) or Horizontal Interlace (HI) format, depending on how the POD detects the attached 3D HDTV. The SbS POD will also convert SbS format content to CB when using the manual override. Wearing RealD 3D Active Eyewear, the viewer will see a true Stereo3D image.

Extras	Variations
Standard input / output interfaces	HDMI 1.3a with type A connector; also DVI compatible
Cables included	10ft HDMI-HDMI and 3ft DVI-HDMI
Universal power supply included	Wall mount power supply has universal input (110V/220V; 60/50Hz); physical connector adapters may be required for some countries
Regulatory agency certification	3D-POD system certified to UL Std. 60950-1; CSA Std. C22.2 #60950-1; FCC Part 15B Class B; IC Class B ICES-003; CISPR 22:2005 Class B. ETL control number 3158172
Automatic Content Detection	Automatically detects when input is RealD 3D SBS format. If so, operates in 3D mode, otherwise operates in 2D mode.
Automatic output format selection	When in 3D mode, automatically selects Checkerboard (CB) or Horizontal Interleave (HI) output format by detecting attached HDTV (e.g. many DLP® ® HDTVs are compatible with CB format)
Automatic video mode support	In 2D mode: Output video mode always follows input video mode, as negotiated with the attached HDTV. In 3D mode: 1080p60 or 1080p24; future - 1080i PsF; 720p
Throughput delay	In 2D mode: < 1 micro second (us) In 3D mode: for CB - ~7us at 1080p60; for HI - ~22us at 1080p60
Input/ouput compatible with HD SDI	Yes, with external converter
Works with any SbS format software	Yes
Visible status indicators	LEDs show power status; port activity; video mode; and 2D/3D mode
User mode override control	Yes. User accessible switches provide flexible mode override control
Small size allows easy installation	3D-POD chassis measures 5.7" x 3.5" x 0.8" (145 x 89 x 20mm) Power supply measures 2.8" x 1.75" x 1.2" (71 x 44.5 x 30.5mm)
Other 3D input formats available	Yes. Other RealD 3D-PODs are available which provide compatibility with "Page Flip" and "Dual Stream" formats

RealD Page Flip POD

The RealD Page Flip 3D POD receives and transmits a single HDMI compatible audio/video signal. When the received content is in Page Flip (frame sequential) 3D format, it is converted into a Checkerboard (CB) format so that when viewing on a CB 3D enabled device or HDTV (e.g. DLP®) and wearing RealD 3D Active Eyewear, the viewer will see a true Stereo3D image. Static 2D content (e.g. PC menus) will be displayed without modification.

Extras	Variations
Standard input / output interfaces	HDMI 1.3a with type A connector; also DVI compatible
Cables included	10ft HDMI-HDMI and 3ft DVI-HDMI
Universal power supply included	Wall mount power supply has universal input (110V/220V; 60/50Hz); physical connector adapters may be required for some countries
Regulatory agency certification	3D-POD system certified to UL Std. 60950-1; CSA Std. C22.2 #60950-1; FCC Part 15B Class B; IC Class B ICES-003; CISPR 22:2005 Class B. ETL control number 3158172
Automatic Content Detection	...
Automatic video mode support	The output video mode will follow the input video mode as controlled from the content source. For correct 3D format conversion, this must be 1080p60 or 1080p24.
Throughput delay	1 frame (~16.7ms) or less
Input/ouput compatible with HD SDI	Yes, with external converter
Works with all stereo software supporting page flip output format	LEDs show power status; port activity; and video mode
Visible status indicators	Yes. User accessible switches provide manual override control
Small size allows easy installation	3D-POD chassis measures 5.7"x3.5"x0.8" (145x89x20mm) Power supply measures 2.8"x1.75"x1.2" (71x44.5x30.5mm)
Other 3D formats available	Yes. Other RealD 3D PODs are available which provide compatibility with Side-By-Side, Dual Stream, and Horizontal Interleave formats.

RealD Dual Input POD

The RealD Professional Dual Input POD will synchronize and merge two independent video streams into a single Checkerboard (CB) format for either Dual Channel or Stereo3D viewing on a 3D enabled DLP® TV. The merged image is made up of each original image, offset. Wearing RealD Active Eyewear, the viewer may see each independent stream through Dual Channel, or a true Stereo3D full-screen image, using RealD Professional CrystalEyes© 3 & 5 eyewear*. An ideal solution when used with RealD Professional DLP® TV Kits, and Plug and Play design means no time wasted setting up.

Extras	Variations
Auto image offset correction	Any offset horizontal/vertical, <1 frame (16.6ms at 1080p)
Standard input / output interfaces with cables included	HDMI 1.3a with type A connector; therefore also DVI compatible; HD SDI compatible through external HD SDI-HDMI converter. One 10ft HDMI-HDMI and two 3ft DVI-HDMI cables included
Universal power supply included	Wall mount power supply has universal input (110V/220V; 60/50Hz); physical connector adapters may be required for some countries
Regulatory agency certification	3D-POD system certified to UL Std. 60950-1; CSA Std. C22.2 #60950-1; FCC Part 15B Class B; IC Class B ICES-003; CISPR 22:2005 Class B. ETL control number 3158172
Automatic Content Detection	Automatically detects when input is RealD 3D SBS format. If so, operates in 3D mode, otherwise operates in 2D mode.
Format input	Single video stream at any resolution on Port A, or dual independent or stereoscopic video streams on Ports A & B, where the resolutions are equal. Clock or frame synchronization is not necessary.
Resolution	1080p max resolution. Only 1080p is supported in merge mode. In single port mode, any standard resolution is supported.
Automatic video mode support	Output video mode follows Port A mode; 1080p resolution required
Throughput delay	In single input 2D mode: < 1 micro second (us) In single input 3D mode: ~7us at 1080p60 In dual input mode: Port A ~14usec; Port B up to ~17msec (depends on input offset - e.g. if A/B offset = 0, Port B ~14usec)
POD Measurements	3D-POD chassis measures 5.7" x 3.5" x 0.8" (145 x 89 x 20mm). Power supply measures 2.8" x 1.75" x 1.2" (71 x 44.5 x 30.5mm)
User override for non-RealD format?	LEDs show power status; port activity; video mode; and 2D/3D mode
User mode override control	Manual override included for single-input conversion from SbS to CB
Visible status indicators	LEDs show power status; port activity; video mode; and 2D/3D mode
Configuration necessary	The display must be configured in 3D mode for stereo visualization. Attachment of inputs and outputs; no manual configuration to POD unless using manual override; input formats must be the same.

VRLOGIC GmbH . Am Bauhof 18 . 64807 Dieburg, Germany
Tel.:+49(0)6071 88139-0 . Fax.:+49(0)6071 88139-88 sales@vrlogic.com
Impressum