|
|
 |
|
|
|
|
|
xpo.2
|
|
The xpo Stereo 3D Convert converts an incoming stereo 3d
signal to two monitor signals, one monitor signal
for the right eye and one for the left eye.
|
|
|
Components |
|
The signals are routed to two projectors, which are stacked and project images in register.
To attain a 3d effect, a polarised filter must be fitted in front of the lens on each projector, and the images must be viewed through polarised 3d glasses.
Setup:
|
Specifications |
|
|
|
|
|
|
xpo.2
|
|
RESOLUTIONS
|
640 x 480 to 1280 x 1024
|
|
FUNCTIONS
|
RS-232 control
Supports control of up to 9 converters from the same RS-232 port
Single mode (sets one of the output channels in black)
Manual control of stereo sync
Programmable custom modes
OSD–menu
|
|
COMPATIBILITY
|
HV (separate sync), CS (composite sync), SOG (sync on green)
PC compatibles, workstations
Frame sequential stereo3D
Vertical Scan: 60 - 120 Hz
Horizontal scan: 15-110 KHz
|
|
INPUTS
|
15 - 25 VDC, 2OW
VGA 15-pin DSUB female
3-pin mini DIN stereo sync connector
RJ45 port with RS232 and RS485 control
RJ45 chain RS485 control
|
|
OUTPUTS
|
2 x VGA 15-pin DSUB female, left and right channel
2 x digital DVI, left and right channel
|
|
SUPPLIED MATERIAL
|
Power adapter 100/240 VAC -19 VDC 2, 36A
RGB computer cable (15 pin DSUB male/male)
Serial RS-232 cable, RJ45 to 9-pin DSUB female
10 pair of polarized glasses
1 pair of polarized filters (75 x 75 mm)
Filter stand
User’s guide
|
|
DIMENSIONS
|
Size: ( 67 x 212 x 242 )mm
Weight: approx. 1,5 kg
|
|
|
|
Specifications subject to change without notice.
|
|
|
|
|
|
