|
|
 |
|
|
|
|
|
5DT Data Glove MRI
|
|
The MRI Version is 5DT´s Data Glove 5 optimized for use in Magnetic Resonance Imaging [MRI]
environments.
|
|
|
Components |
|
The 5DT Data Glove MRI Series is optimized for use in Magnetic Resonance Imaging (MRI) environments. The glove itself does not contain any magnetic parts. It communicates with a control box (3m away) via optical fiber. The control box interfaces with the computer via a cable to the serial port (RS 232 - platform independent). 5-Sensor and 14-sensor models are available. Right- and left-handed models are available. One size fits many (stretch lycra).
General Features of the 5DT Data Glove series:
* Affordable quality
* Extreme comfort
* One size fits many
* Animation program drivers
* 8-Bit flexure resolution
* Cross-platform software drivers
* Bundled software
* High update rate
* On-board processor
* Low crosstalk between fingers
* Wireless versions available
* Quick "hot release" connection
* Platform independent serial port interface (RS 232), USB adaptor available
* Right- and left-handed versions available
* Open architecture
|
Specifications |
|
|
|
|
|
MATERIAL
|
Black strech lycra
|
|
FLEXURE RESOLUTION
|
8-bit A/D 12-bit A/D
|
|
FLEXURE SENSORS
|
Fiber optics based
5 Sensors in total
1 Sensor per finger
|
|
CONTROL BOX INTERFACE
|
RS 232 (TX, RX, RTS, GND)
8 Data bits, 1 stop bit, no parity
19200 bps (transmit and receive)
[9600 bps for wireless version]
Power supply: 7.5V DC center positive (150mA)
Sampling rate: The full hand (5 sensors plus 2 tilt angles) may be sampled) may be sampled at up to 200 times per second.
2-Axis tilt sensor:±60º Linear range (8-bit)
|
|
SOFTWARE
|
Calibration and testing software, drivers, demos and programming examples are supplied with the glove.
Software drivers for Win 9X/NT/2000 (free), Linux (free) and Unix are available. The 5DT Data Glove Series is also supported
by most mainstream animation programs.
|
|
|
|
Specifications subject to change without notice.
|
|
|
|
|
|
